Sale!

BEXT XL 6000

Original price was: $22,869.17.Current price is: $145.00.

SKU: XQ34660626284 Category:

Description

Ultra Compact XL 6000 New Generation 6000 W Full Featured FM TransmittersMain Features:NEW Now available with optional built-in multiband high performance Audio ProcessorEasy access to settings, functions and readings via touch screen color display and via web pageBuilt-in User Manual file always accessible via front panel port even when AC power is disconnectedOptions include AES-EBU Digital Audio Input, Dynamic RDS/RBDS Encoder, Audio Over IP, SNMP2Newest high efficiency, high ruggedness LD MOS devices capable of withstanding 65:1 VSWRConservatively rated, easily replaceable, highly efficient power suppliesProportional Auto-Foldback of RF output power protection in the event of excessive VSWRExcellent audio performance and built-in Stereo Generator with fast acting audio limiterUp to six available user-programmable profile presets for use as a backup of multiple FM stationsProgrammable FSK ID Keyer by software for use as auto-ID of Translators or BoostersOptional 10 MHz Ext Ref port + 1 pps port for Phase Locking & Time Delay Adj. to sync boosters or SFNsHighly efficient transmitters with low power consumption and low heat generationAll Bext FM transmitters include low pass/harmonic filter and meet or exceed all FCC requirementsSpecifications:RF Specifications- Nominal RF Output Power: 6000 W adjustable from menu or via webpage- Power control stability: Better than 0.1 dB- RF Output: 1 5/8 EIA Flange (or 7/8 EIA Flange on request) 50 W unbalanced.- Frequency range: 87.5-108 MHz, front panel programmable or via webpage, 10 kHz steps- Reference: 10 MHz TCXO- Off-lock attenuation: > 80 dBc- Start-up time: Typically 5-10 seconds- Type of modulation: F3E / F8E direct FM at carrier frequency- Frequency deviation: Nominal 75 kHz- Accuracy of deviation: < 2 dB from 87.6 to 107.9 MHz- Frequency drift: 1 kHz/year MAX (due to internal TCXO aging).- Short term stability: 1 ppm from -5 to +45 C (100 Hz @ 100 MHz)- RF Harmonics: Exceeds EBU/CCIR/FCC requirements- RF Spurious: Exceeds EBU/CCIR/FCC requirementsAudio General Specs- Preemphasis: Selectable Flat / 50 / 75 micros.- Preemphasis Precision: Better than 0.5 dB- Wideband Amplitude Response: 0.2 dB 30 Hz to 100 kHz- Wideband AM Asynchronous: < -68dB, typ. -80dB- Wideband Distortion, THD: < 0.1% (typ. 0.05%)- WB Distortion, IMD: < 0.1% (typ. 0.05%)- WB Transient IMD: < 0.25% (square/sine wave)Composite & Mono Specs- S/N: Typical Values referred to 75 kHz- Weighted (CCIR 468/2 Peak CCIR detector) 75 dB / 50 ms 69 dB / flat- Weighted (CCIR 468/2 RMS detector) 79 dB / 50 ms -72 dB / flat- Unweighted (RMS detector, meas. 20 Hz-23 kHz) 86 dB / 50 ms 80 dB / flat (stereo)- Unweighted (RMS detector, meas. 20 Hz-23 kHz) 92 dB / 50 s 88 dB / flat (mono)- IMD: 70 Hz / 6 kHz 4:1 RATIO < 0.03% measured with 1 kHz and 1.3 kHz tones, 1:1 ratio @ 75 kHz deviation- Transient IM: < 0.03 % (square/sine)- Audio response: 0.15 dB 20 Hz to 15 kHz- AM Synchronous: < -69 dB- AM Asynchronous: < -70 dB (typ. -85 dB)- Common mode rejection: > 45 dB typical, 25 Hz to 15 kHzBuilt-in Stereo Gen. Specs- Stereo System: EBU/CCIR/FCC standard Pilot Tone System- Pilot Tone Frequency: 19 kHz 1 Hz- Pilot Tone Deviation: 7 kHz nominal- 38 kHz Suppression: > 70 dB (typ. 85 dB)- 38 kHz Tone Generation: Internal Crystal- 38 kHz Tone Precision: 38 kHz 2 Hz- Phase response: 19/38 kHz 0 2, internally adjustable- Stereo Separation: 30-80 Hz >53 dB, 80 Hz-15 kHz >60 dB- Crosstalk attn. (M / S): > 40 dB, 40 Hz to 15 kHz (typ. 55 dB, 100 Hz to 8 kHz)- Audio Spurious Products: > 53 kHz < 50 dB- THD on L & R channels: < 0.03%, 30 Hz-15 kHz- Audio Filter Attenuation: > 55 dB @ 19 kHz; >45 dB 19 to 50 kHz; > 50 dB to 100 kHz (typ.)Audio Inputs (on rear panel)- Baseband / Composite / MPX Input: 1 BNC connector, unbalanced, 2 kW.- Input level range for 75 kHz Deviation: 6 to +12 dBm, adjustable from menu- SCA / RDS / AUX Input: BNC connector, unbalanced, 2 kW. Input level range: 6 to +12 dBm, adjustable from menu- L&R or Mono Input: 2 XLR connectors, 600W balanced or unbalanced, switchable, or 10k unbalanced, input level range for 75 kHz Deviation: -6 to +12 dBm, adjustable from menu- AES-EBU input (optional) XLR connector and optional optical connectorOther Connectors (on rear panel)- 19 kHz Output: 1 BNC connector, unbalanced, Pilot tone 2 Vpp 19 kHz- Baseband / Composite / MPX Output: 1 BNC connector, unbalanced- DB25 for Analog Telemetry & Remote Control- RJ 45s: LAN / WEB connection, optional VOIP, optional SNMP2- USB A: for SNMP2 Software- DB9: RS485 for interconnection w/ other units- SMAs for 10 MHz external reference port and for 1 pps port (optional)Front Panel Connectors- USB C or micro: Front panel port to access user manual file & other technical test reports- RF Monitor: -36 dBc 3 dB, 50 W BNCEnvironmental- Storage temperature: -20C to + 60 C- Operating temperature: -10C to + 45C- Relative humidity: 90% (non-condensing)- Max operating altitude: 3000 m.- Max ambient field strength: 3 V/m; 4 A/m- Cooling: Forced air (easily replaceable fans)Physical & Electrical- Front panel: 483mm (19) W x 178mm (7) H (four standard rack spaces high)- Cabinet depth from front panel: approximately 590 mm (23 1/4)- Approximate Weight: 70 lbs (32 Kg)- Approx. Packed Weight: 110 lbs (50 Kg)- AC Power Requirement: 220V [15%] single or three phase, 50/60Hz.- Approx. Power Consumption @ Full PWR: 8200 VAAvailable Readings include- FWD PWR- RFL PWR- Frequency- Audio Presence- Deviation- Preemphasis Status- Audio Input Selection- L & R Channels Modulation Level- Stereo Generator Enabled / Disabled- Audio Limiter Enabled / Disabled- VPA- IPA- Temperature- Efficiency- Status of FSK ID Keyer and many other readings & functionsNotes- All Bext products features & specifications are subject to change without notice

Reviews

There are no reviews yet.

Be the first to review “BEXT XL 6000”

Your email address will not be published. Required fields are marked *